Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the engine from the MV Agusta Brutale 1000RR, first, you need to take it out of its housing by loosening the bolts that secure it to the respective supports. Then, disconnect all the connectors related to the sensors and detach the corresponding hoses. Once the engine block is free, you can extract it from its housing by removing the ignition coils and spark plugs. Then, the valve cover and cylinder head can be removed by loosening the bolts, allowing access to the internal components for replacement if necessary.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the MV Agusta Brutale 1000RR?
How do you disassemble the engine of the MV Agusta Brutale 1000RR?
Brutale 1000rr In order to disassemble the engine of the MV Agusta Brutale 1000RR, you need to loosen the screws that secure the engine block to its housing: the la…
How do you replace the exhaust of the MV Agusta Brutale 1000RR?
How do you replace the exhaust of the MV Agusta Brutale 1000RR?
Brutale 1000rr The exhaust of the MV Agusta Brutale 1000RR can be replaced by loosening the screws that secure the terminal to its housing, allowing it to be releas…
How do you replace the exhaust pipe of the MV Agusta Brutale 1000RR?
Brutale 1000rr In order to replace the exhaust of the MV Agusta Brutale 1000RR, you need to loosen the screws that hold the exhaust terminal to its housing, so that…

How to change the engine oil on a Sym Elite 50?

To change the engine oil on a Sym Elite 50, start by placing the scooter on a flat surface and ensure the engine is warm, not hot. Locate the oil drain plug on the engine and position a collection container underneath it. Unscrew the drain plug and let the used oil flow into the container. Once the drainage is complete, re-tighten the drain plug. Next, locate the oil filler cap on the engine and remove it. Use a funnel to pour new oil into the tank, being careful not to exceed the recommended level. Once the new oil is added, re-tighten the filler cap. Ensure both caps are securely fastened. Start the scooter for a few minutes to allow the oil to circulate in the engine. Finally, turn off the scooter, and you will have completed the oil change.

Watch the video!


by ScegliAuto

More videos