Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front windshield wipers of the Nissan X-Trail

Model: Nissan X Trail MK 1, T30 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Windshield wipers

See other generations:
Video tutorial

The following steps will show us how to disassemble and replace the front wipers of the Nissan X-Trail. First, let's move to the front of the car and start by lifting the wiper arm; then we rotate the wiper blade and release the clip to detach and remove it, as shown in the video.

At this point, we install the new front wiper, attaching the clip to secure it properly on the arm; we gently lower the arm and proceed in the same way to replace the other front wiper!


Posted on 7 February 2025 by ScegliAuto


Related tutorials

How to Replace Front Wiper Blades on Nissan X-Trail
How to Replace Front Wiper Blades on Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) .. to replace the front wiper blades on a Nissan X-Trail. Take the front wiper blade (to be replaced) in your hands, gently pull the movable blade as shown.. …
Where are the fuses located in the Nissan X-Trail?
Where are the fuses located in the Nissan X-Trail?
Nissan X Trail (2007-2014 / MK 2, T31) .. Every fuse of the Nissan X-Trail is located inside one of the appropriate fuse boxes that are installed on the vehicle: in this.. …
Where is the fuse box located in the Nissan X Trail 1?
Where is the fuse box located in the Nissan X Trail 1?
Nissan X Trail (2001-2006 / MK 1, T30) .. The Nissan X Trail model 1 has two fuse boxes. The first fuse box is located under the bonnet, specifically near the.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos