Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : Removing the front door panel on 2018 Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Door panel
Operation: Removing the front door panel on 2018 Nissan Qashqai

Let's see the disassembly of the door panel of the Nissan Qashqai. We remove the cover panel if it is damaged or if we have to intervene inside the door. We remove the frame around the door opening lever, we remove the handle cover and the push button panel. We unscrew the screws on the door panel and remove the clips for tightening it. We detach the cover panel piece by piece and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door if the removed panel does not need to be replaced.


Posted on 23 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos