Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Nissan Altima?

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin filter in a Nissan Altima, a very simple and quick operation. It is located under the dashboard, on the passenger side, right at the junction with the center tunnel.

First, go to the indicated position and locate the filter housing, then unlock the lower clip of the rectangular door and open it. At this point, you can remove the old filter and insert the replacement, placing it in the correct orientation, indicated on the side of the filter itself.

Finally, reposition the door.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the Nissan Altima?
How to Replace the Cabin Air Filter in the Nissan Altima?
Nissan Altima (2013-2018 / L33) To replace the cabin air filter in the Nissan Altima, detach the side cover of the footwell, near the center console. Once this panel is removed, acc…
How to Change the Cabin Air Filter on the 2016 Nissan Altima
How to Change the Cabin Air Filter on the 2016 Nissan Altima
Nissan Altima (2013-2018 / L33) If you are looking for a step-by-step guide to help you complete the replacement of the cabin air filter in your 2016 Nissan Altima, you are in the r…
How to replace the cabin air filter of the 2020 Nissan Altima
How to replace the cabin air filter of the 2020 Nissan Altima
Nissan Altima (2018-2026 / L34) If you own a 2020 Nissan Altima and want to learn how to properly replace the cabin air filter, all you have to do is follow the steps described in t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos