Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Nissan Magnite

Model: Nissan Magnite MK 1, DD0 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

Video tutorial

Today, this guide provides instructions to remove and replace the stock radio in a Nissan Magnite in simple and quick steps. First, get inside the vehicle and start by removing the center control panel and the climate controls, prying from the sides and disconnecting the electrical cables at the back.

Then, unscrew the mounting screws for the center display and the radio, as shown in the video. At this point, disconnect the electrical connectors to remove and permanently replace the radio, applying the reverse procedure!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Nissan Magnite
How to Replace the Radio in a Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) To replace the radio in a Nissan Magnite, use a tool to pry off the trim that surrounds the radio and runs along the dashboard. Once this trim is rem…
How to Install a New Antenna on a Nissan Magnite
How to Install a New Antenna on a Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) In this guide, you will find instructions on how to install a new antenna on a Nissan Magnite by following these simple steps. There are two methods …
How to Play Videos on the Nissan Magnite
How to Play Videos on the Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) Today, you will learn in this brief and simple guide how to play videos and multimedia content on the Nissan Magnite. First, get inside the vehicle a…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos