Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In today's video, learn how to turn off the tyre pressure light on a Ford Fiesta. First, check the correct inflation pressure of all tyres and, if necessary, adjust them.

Now, get into the car and turn on the instrument cluster. Press and hold the button corresponding to the tyre pressure light, located at the bottom, and after a few seconds, the light on the dashboard will start to flash.

After a few seconds, the operation will be complete. Drive a few miles to stabilise the tyres and check if the light comes back on.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Nissan Juke?
How to Reset the Tyre Pressure Warning Light on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The tyre pressure warning light that appears on the instrument cluster of the Nissan Juke can be reset by inflating the tyres to the recommended pres…
How to reset the tyre pressure light on a 2014 Nissan Juke?
How to reset the tyre pressure light on a 2014 Nissan Juke?
Nissan Juke (2010-2019 / MK 1) Inside the cabin of the 2014 Nissan Juke, on the right side next to the steering wheel, there is a button panel with some very useful functions. One …
Resetting the tyre pressure of the Nissan Juke
Resetting the tyre pressure of the Nissan Juke
Nissan Juke (2019-2026 / MK 2) When the load conditions of the Nissan Juke change, you must adjust the tyre pressure values accordingly: for reference, you will find a label on the…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos