Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse diagram for the Nissan Micra

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

This vehicle has three fuse boxes. The first is located in the cabin at the lower part of the dashboard on the left side near the door.

The second box is in the engine compartment on the left side behind the headlight, and the third is also in the engine compartment in front of the battery. Below is the diagram for the last box: one Horn Relay; F24 15A Audio system, navigation system; F25 10A horn; F26 10A Generator; F27 10A Daytime running lights – if available; F29 40A ABS electronic control unit; F30 40A Cooling fan relay; F31 40A Ignition switch; F32 40A Coolant heater; F33 40A Multifunction control unit 1; F34 30A ABS electronic control unit; F35 30A Headlight washer relay; F36 60A ABS electronic control unit.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Diagram and Location of the Fuse Box for the Nissan Micra K13
Diagram and Location of the Fuse Box for the Nissan Micra K13
Nissan Micra (2010-2017 / K13) This brief and simple guide outlines the diagram and positioning of the fuse boxes for the Nissan Micra K13, following these easy steps. First, open …
Fuse Diagram for the Nissan Micra K12
Fuse Diagram for the Nissan Micra K12
Nissan Micra (2002-2010 / K12) In this video, you can see where the fuse box is located on the Nissan Micra. The fuse box can be found just below the steering wheel on the driver's…
What is the fuse diagram for the Nissan Micra?
Nissan Micra (2002-2010 / K12) .. This video shows the fuse diagram for the Nissan Micra. This model has three fuse boxes: one located inside the cabin, behind.. …

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos