Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlights of the Nissan Micra K13

Model: Nissan Micra K13 - Years 2010-2017
Part: Headlight

Let's see how to disassemble the front headlights of the Nissan Micra K13: make sure the vehicle is turned off and the wheels are straight. Loosen the front bumper on the side to be disassembled, removing the screws and clips under the bumper in the wheel area, and those from the engine compartment along the top edge; then gently unlock the bumper to access the side area of the headlight. Locate the fastening points of the headlight, where we have a visible upper screw in the engine compartment, near the headlight, a positioning pin on the inner side towards the grille, a hidden lower screw accessible from below as highlighted in the video). Remove the screws with a long socket wrench for the lower part, disconnect the electrical connector, and remove the headlight decisively, but without jerking. Be careful with the clips, as they are fragile and break easily.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the radio panel of the Nissan Micra K13
How to disassemble the radio panel of the Nissan Micra K13
Nissan Micra (2010-2017 / K13) If you need to disassemble the entire protective panel located on the central dashboard of your Nissan Micra K13 by yourself, all you have to do is f…
How to Replace the Front Headlamp Bulb on a Nissan Micra K13
How to Replace the Front Headlamp Bulb on a Nissan Micra K13
Nissan Micra (2010-2017 / K13) In this new mini guide dedicated to your Nissan Micra K13 (2010-2017), discover the steps you need to follow to correctly replace the front headlamp …
Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos