Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : Headlight

Nissan Micra - Headlight

Nissan Micra (1992-2002 / K11)
How to disassemble the headlight of the Nissan Micra

We will see below the steps that will allow us to disassemble and replace the front headlight of the Nissan Micra, following the instructions below. First of …read all…
Posted on 29 May 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How do you remove the headlight from the Nissan Micra?

In order to remove the headlight from the Nissan Micra, you need to go and open the bonnet, in order to access the supports that fix the headlight in the upper …read all…
Posted on 29 November 2022 by ScegliAuto
Nissan Micra (1992-2002 / K11)
How do you remove the headlight from the Nissan Micra?

Removing the headlight from the Nissan Micra is done first of all by opening the bonnet: in this way you will have access to the screws that fix the optical …read all…
Posted on 29 December 2022 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to remove the headlight in the Nissan Micra?

In this tutorial we can see how to remove the headlight in the Nissan Micra, a very simple and fast operation. To access the fixing screws of the same we will …read all…
Posted on 5 October 2022 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Removal of Nissan Micra headlight

In the video in question we will see the instructions that will allow us to disassemble the front light of a second series Nissan Micra. First we open and lift …read all…
Posted on 24 March 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Removal of the headlight on Nissan Micra

Lift the hood and remove the round clips that secure the structure of the headlight concerned to the bumper: to remove them, simply pry them up from underneath …read all…
Posted on 18 February 2024 by ScegliAuto

Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos