Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Rear light bulb

Nissan Micra - Rear light bulb

Nissan Micra (2017-2024 / K14)
How do you replace the rear headlight bulb of the Nissan Micra?
To replace the rear light bulb of the Nissan Micra, you need to open the rear hatch of the car so that you can access the screw that holds the light inside its …read all…
Posted on 7 April 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to replace the rear turn signal bulbs in Nissan Micra?
In this tutorial we can see how to replace the rear turn signal bulbs in the Nissan Micra, a very simple and fast operation. After getting some PY21W bulbs, we …read all…
Posted on 7 April 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to replace the rear light bulb on a Nissan Micra
Before we can start, we will have to go to open the tailgate of the luggage compartment of our Nissan Micra. So let's start by unscrewing and removing the two …read all…
Posted on 20 January 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to replace the rear light bulb on a Nissan Micra?
Before we begin, we will have to open the tailgate of the luggage compartment of our Nissan Micra. So let's start by unscrewing and removing the two fixing …read all…
Posted on 20 January 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Remove brake light on Nissan Micra
Are the rear light bulbs burned out? Let's see the disassembly of the rear light on Micra. We open the hood of the luggage compartment and lift it. Using a …read all…
Posted on 12 December 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Nissan Micra K12 rear light bulb replacement
The replacement of the rear light bulb is very simple to carry out but it is necessary to remove the light itself: therefore open the rear hood and intercept …read all…
Posted on 2 September 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Rear light bulb replacement
In order to replace the rear light bulb it is necessary to remove the light itself: therefore open the rear hood and unscrew the two fixing pins of the light …read all…
Posted on 28 August 2023 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos