Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Timing belt

Nissan Micra - Timing belt

Nissan Micra (2002-2010 / K12)
How to replace the timing belt of the Nissan Micra
The replacement of the timing belt on a Nissan Micra model K12 follows simple steps that can be done independently. The first steps are to open the front hood …read all…
Posted on 26 February 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Guide to replacing the timing chain of the Nissan Micra 1.2.
Today we will see the main information useful for disassembling and the distribution chain of the Nissan Micra 1.2, following the instructions below. First, we …read all…
Posted on 28 October 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to replace the timing chain of the Nissan Micra
In this video tutorial we will see how to replace the Nissan Micra timing chain, following the instructions below. First we lift the car and start removing the …read all…
Posted on 29 April 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Cme replace the distribution on Nissan Micra
Do we want to replace the timing belt on our Micra? Let's see how the belt is removed on a Nissan Micra. We lift the front hood of the car and identify the …read all…
Posted on 26 January 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Nissan Micra K12 1.0 petrol timing chain replacement
The 1.0 petrol engine of the Nissan Micra K12 has a chain distribution and it may happen that this tends to lengthen and consequently becomes noisy; replacing …read all…
Posted on 30 December 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Timing chain replacement on Micra K12
Let's see the replacement of the timing belt on a Nissan Micra. We remove the right front wheel after lifting the vehicle on a jack. After removing the stone …read all…
Posted on 29 December 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Replacing the timing belt on a Nissan Micra
Let's get ready to replace the timing belt on a Nissan Micra: lift the car on a column or jack bridge and remove the front wheel, with a screwdriver the right …read all…
Posted on 31 October 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to inspect the timing chain of the Nissan Micra 1000 cc petrol
The timing chain, unlike the classic rubber toothed belt, does not require scheduled maintenance, indeed it generally never has to be replaced, especially if …read all…
Posted on 6 September 2023 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos