Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing chain of the Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

See other generations:
Video tutorial

In this guide, we will see the main instructions on how to disassemble and replace the timing chain of the Nissan Micra. In order to access the timing chain, it is necessary to remove the valve cover and the distribution cover; to do this, we lift the vehicle and remove the crankshaft pulley, first removing the V-belt.

Once the screws of the oil pan are unscrewed, it will be possible to remove it, thus accessing the engine timing chain; we carry out the replacement of the chain, installing the original one, following the video tutorial until the end!


Posted on 22 December 2024 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Nissan Micra (2002-2010 / K12) Today, review the key information needed to dismantle the timing chain on the Nissan Micra 1.2, following the instructions below. First, open the bon…
How do you replace the timing chain of a Nissan Micra?
How do you replace the timing chain of a Nissan Micra?
Nissan Micra (2010-2017 / K13) It will be possible to replace the timing chain of the Nissan Micra by lifting the car so that the corresponding front wheel is not in contact with t…
How do you replace the timing chain of the Nissan Micra?
How do you replace the timing chain of the Nissan Micra?
Nissan Micra (2010-2017 / K13) You can go and perform the replacement of the timing chain of the Nissan Micra by lifting the car with a jack or a bridge, so that it is then possibl…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos