Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt of the Nissan Micra 1.4

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: V-belt

See other generations:
Video tutorial

In this short guide, we will see the instructions useful for disassembling and replacing the serpentine or V-belt of the Nissan Micra 1.4. First of all, lift the car and start by disassembling and removing the front right wheel and the fender; then loosen the tensioner using a wrench to remove the serpentine belt, as shown in the video.

At this point, install the new V-belt, properly securing it between the various pulleys (rotate the pulleys to ensure correct insertion); finally, reassemble the front wheel!


Posted on 24 April 2025 by ScegliAuto


Related tutorials

How to replace the timing belt of the Nissan Micra
How to replace the timing belt of the Nissan Micra
Nissan Micra (2010-2017 / K13) The timing belt on a Nissan Micra is located under the engine, so in order to replace it, it is necessary to lift the vehicle on jack stands and remo…
Guide to replacing the timing chain of the Nissan Micra
Guide to replacing the timing chain of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide, we will see the main instructions on how to disassemble and replace the timing chain of the Nissan Micra. In order to access the timin…
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Nissan Micra (2002-2010 / K12) Today, review the key information needed to dismantle the timing chain on the Nissan Micra 1.2, following the instructions below. First, open the bon…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos