Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : Remove the thermostatic valve on Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Valve
Operation: Remove the thermostatic valve on Nissan Micra

Do you want to disassemble the thermostatic valve of your car yourself and do not know how to do it? Let's see in the following video where and how to remove the thermostat on Nissan Micra. Unscrew the pins on the thermostat sleeve cap as shown in the video (we use a socket wrench with relative bushes), remove the sealing cap and extract the coolant thermostat from its seat. Once the piece has been removed, replace it with a new one and close the compartment with the cap. We tighten the pins well and we're done. Make sure that you have correctly inserted and mounted the valve in the appropriate housing.


Posted on 14 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos