Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Sump on a Nissan Maxima?

Model: Nissan Maxima MK 7, A35 - Years 2008-2014
Part: Oil pan

In this tutorial, learn how to replace the oil sump on a Nissan Maxima, a straightforward operation that requires attention. First, wait for the engine to cool sufficiently, then position a container underneath, unscrew the bolt on the oil sump, and drain the system completely. Once done, unscrew the bolts around the perimeter of the sump with a 10 mm spanner, separate it from the engine, and remove any remnants of the old gasket. At this point, you can position the new parts, tighten each bolt, and add new oil.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Duration in a Nissan Maxima
How to Reset the Oil Duration in a Nissan Maxima
Nissan Maxima (2003-2008 / A34, MK 6) In this tutorial, you will learn how to reset the oil duration in a Nissan Maxima by following a few simple steps: before performing the service rese…
How to recalibrate the sunroof in the Nissan Maxima?
How to recalibrate the sunroof in the Nissan Maxima?
Nissan Maxima (2008-2014 / MK 7, A35) In this tutorial we can see how to recalibrate the sunroof in the Nissan Maxima, an extremely simple and quick operation, to be carried out for examp…
How do you reset the tire pressure light on the Nissan Maxima?
How do you reset the tire pressure light on the Nissan Maxima?
Nissan Maxima (2003-2008 / A34, MK 6) To reset the tire pressure light of the Nissan Maxima, you need to inflate the tires until they reach the recommended pressure value: this value will…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos