Do it yourself
Frequently asked questions about cars and motorcycles

Nissan Micra - Lock

Nissan Micra (2002-2010 / K12)
How to open the door of the Nissan Micra with a dead remote control?

In this tutorial, we can see how to open the door of the Nissan Micra in case of a complete battery discharge of the remote control, an extremely simple and …read all…
Posted on 17 March 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How do you replace the rear hatch lock of the Nissan Micra?

The replacement of the rear door lock of the Nissan Micra is done by opening the door, so that the internal plastic panel can be located: this must be detached …read all…
Posted on 11 January 2024 by ScegliAuto
Nissan Micra (2017-2024 / K14)
How to open the trunk of a Nissan Micra from the inside in an emergency.

In this video tutorial we can see how to open the trunk of a Nissan Micra from the inside in an emergency, by following a few simple steps that will help you …read all…
Posted on 3 May 2023 by ScegliAuto
Nissan Micra (1992-2002 / K11)
How do i remove the ignition lock from the Nissan Micra?

In order to remove the ignition lock of the Nissan Micra you need to loosen the screws located under the steering column, so that the appropriate plastic cover …read all…
Posted on 17 June 2022 by ScegliAuto
Nissan Micra (1992-2002 / K11)
How to replace the car door lock

The replacement of the lock is necessary in the event that it has been forced by an attempted theft and simply because the internal elements have worn to such …read all…
Posted on 7 September 2023 by ScegliAuto

Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos