Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Front bumper

Nissan Micra - Front bumper

Nissan Micra (2002-2010 / K12)
How to remove the front bumper of the Nissan Micra
Today we will see the instructions that will allow us to disassemble and replace the front bumper of the Nissan Micra, in simple steps. First of all, we open …read all…
Posted on 15 April 2024 by ScegliAuto
Nissan Micra (1992-2002 / K11)
How to remove the front bumper of a Nissan Micra
Before we begin, we will need to open the front hood of our Nissan Micra. So let's start by unscrewing and removing the bolts that secure the headlights to the …read all…
Posted on 25 February 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Removal of the front bumper on Nissan Micra k12
To begin with, you can remove the clips (with a medium-small flat screwdriver) and the screws placed in the two wheel arches, and then remove them. Still with …read all…
Posted on 10 February 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Replacement of the front bumper on Nissan Micra
Do we want to remove the front bumper? Let's see how the front bumper of the Nissan Micra is replaced. We lift the bonnet and put it in safety, we remove the …read all…
Posted on 1 February 2024 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos