Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Bearing

Nissan Micra - Bearing

Nissan Micra (2010-2017 / K13)
How to replace the rear wheel bearing of Nissan Micra
In this video tutorial we will see how to remove and replace the rear wheel bearing of the Nissan Micra, in simple and quick steps. First we lift the car and …read all…
Posted on 24 April 2024 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Nissan Micra rear wheel bearing replacement
In this very practical video we will see how to remove the rear wheel bearing of a Nissan Micra. First of all we lift the car, even with stands, and we remove …read all…
Posted on 11 December 2023 by ScegliAuto
Nissan Micra (1992-2002 / K11)
Replace bearing on Nissan Micra
If the wheel bearing is damaged we need to replace it, let's see how. We lift the car on a column bridge, loosen the pins with a telescopic wrench and lift it …read all…
Posted on 1 December 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Rear wheel bearing replacement
Obtain replacement bearings. Raise the car, secure it and remove the wheel. Remove the metal protection that protects the sealing bolt placed on the hub which …read all…
Posted on 19 July 2023 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos