Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on the Nissan Micra

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Bearing

See other generations:
Video tutorial

In this video tutorial, see how to remove and replace the rear wheel bearing on the Nissan Micra in simple and quick steps. First, lift the vehicle and start by removing the rear wheel; then, take off the brake drum by unscrewing the central bolt with a 30 mm socket, as shown in the video.

Next, remove the drum bearing using thin levers; then install the new wheel bearing, tapping it into place, following the video to the end!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Bearing on a Nissan Micra
Replacing the Rear Wheel Bearing on a Nissan Micra
Nissan Micra (2002-2010 / K12) In this practical video, you will learn how to remove the rear wheel bearing on a Nissan Micra. First, lift the vehicle, using axle stands if necessa…
Replace Wheel Bearing on Nissan Micra
Replace Wheel Bearing on Nissan Micra
Nissan Micra (1992-2002 / K11) If the wheel bearing is damaged, you need to replace it. Lift the car on a column lift, loosen the bolts with a telescopic spanner, and raise it to a…
Rear Wheel Bearing Replacement
Rear Wheel Bearing Replacement
Nissan Micra (2002-2010 / K12) Obtain replacement bearings. Lift the vehicle, secure it, and remove the wheel. Take off the metal cover protecting the retaining bolt on the hub, wh…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos