Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Replace bearing on Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Bearing
Operation: Replace bearing on Nissan Micra

If the wheel bearing is damaged we need to replace it, let's see how. We lift the car on a column bridge, loosen the pins with a telescopic wrench and lift it to a preferred height to intervene. We unscrew the pins and remove the rim, then we begin to unscrew the pins of the caliper support and detach it away. Unscrew the brake disc pins and detach it from the wheel hub. We extract the bearing from the hub as in the video and compare it with the new piece. We assemble the new bearing on the wheel hub and all the other pieces by proceeding in reverse the disassembly operations.


Posted on 1 December 2023 by ScegliAuto



How to replace the rear wheel bearing of Nissan Micra
Nissan Micra (2010-2017 / K13) In this video tutorial we will see how to remove and replace the rear wheel bearing of the Nissan Micra, in simple and quick steps. First we lift the
Nissan Micra rear wheel bearing replacement
Nissan Micra (2002-2010 / K12) In this very practical video we will see how to remove the rear wheel bearing of a Nissan Micra. First of all we lift the car, even with stands, and
How to replace the rear drum brake wheel bearing.
Nissan Micra (2002-2010 / K12) Place the car on the bridge and raise it to a height that you can work on it. Remove the rear wheel and, with a screwdriver, remove the metal cover i

    Frequently Asked Questions

    • Micra 2002-2010 - How much does the Nissan Micra front hub bearing cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos