Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to replace the rear drum brake wheel bearing.

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Drums and shoes
Operation: How to replace the rear drum brake wheel bearing.

Place the car on the bridge and raise it to a height that you can work on it. Remove the rear wheel and, with a screwdriver, remove the metal cover in the center of the wheel. Using the appropriate wrench, unscrew the central bolt and remove the drum cover. In the internal part of the same, lever out the bearing stop. Take the new drum brake cover and, with a suitable machine, insert the bearing in the center of it. Engage the bearing retainers (internal with hammer and external with pliers) and refit the drum cover. Now reassemble everything following the above operations but proceeding in the opposite order. The car on which the image maintenance operation is performed is carried out in a Nissan Micra.


Posted on 8 September 2023 by ScegliAuto



How to replace the rear wheel bearing of Nissan Micra
Nissan Micra (2010-2017 / K13) In this video tutorial we will see how to remove and replace the rear wheel bearing of the Nissan Micra, in simple and quick steps. First we lift the
Nissan Micra rear wheel bearing replacement
Nissan Micra (2002-2010 / K12) In this very practical video we will see how to remove the rear wheel bearing of a Nissan Micra. First of all we lift the car, even with stands, and
How to replace the rear brake drum of a Nissan Micra?
Nissan Micra (2002-2010 / K12) Before we can begin, we will need to lift the rear side of our Nissan Micra, using the appropriate jack. So let's start by unscrewing and removing th

    Frequently Asked Questions

    • Micra 2010-2017 - How much does it cost to replace the rear brake shoes on a Nissan Micra? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos