Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Nissan Micra - Seat

Nissan Micra (1992-2002 / K11)
Disassembly of the rear seats of the Nissan Micra
We will briefly see how to disassemble and replace the rear seats of the Nissan Micra, following these simple and quick steps. First, we open the rear doors …read all…
Posted on 14 January 2024 by ScegliAuto
Nissan Micra (2010-2017 / K13)
Guide to disassembling the rear seats of the Nissan Micra.
Today we will see, in this short and simple guide, how to disassemble and replace the rear seats of the Nissan Micra, following the instructions below. First, …read all…
Posted on 19 April 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to disassemble the driver's seat in the Nissan Micra?
As we can see in this tutorial, disassembling the driver's seat in the Nissan Micra is an extremely simple and fast operation. First of all, move the seat …read all…
Posted on 3 April 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to remove the front seat of the Nissan Micra
We do not know how to remove the seat of the Nissan Micra? Let's see how the front seat of the Micra is removed. We move the seat back with the displacement …read all…
Posted on 7 February 2024 by ScegliAuto
Nissan Micra (2017-2024 / K14)
Removal of rear seats on Nissan Micra
Firmly pull the rear single seat seat, from underneath, as shown in the video. At this point, remove the double seat (right rear seat and center seat are …read all…
Posted on 20 January 2024 by ScegliAuto
Nissan Micra (1992-2002 / K11)
Remove the rear seat on the Micra
Remove the rear seat of the Micra to replace it? Not too complex operation, let's see the disassembly. We overturn the rear backrests and remove the metal …read all…
Posted on 24 December 2023 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos