Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to remove the front seat of the Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Seat
Operation: How to remove the front seat of the Nissan Micra

We do not know how to remove the seat of the Nissan Micra? Let's see how the front seat of the Micra is removed. We move the seat back with the displacement lever and bring the seat up, then, with a socket wrench, unscrew the tightening screws placed on the front rail. We move the seat forward with the shift lever and remove the locking pins from the rear of the rail. Finally we disconnect the power supply terminals of the front seat if present, we remove the whole seat. We mount a new seat on the front rails or have the previously removed one repaired.


Posted on 7 February 2024 by ScegliAuto



How to remove the front bumper of a Nissan Micra
Nissan Micra (1992-2002 / K11) Before we begin, we will need to open the front hood of our Nissan Micra. So let's start by unscrewing and removing the bolts that secure the headlig
How to disassemble the driver's seat in the Nissan Micra?
Nissan Micra (2002-2010 / K12) As we can see in this tutorial, disassembling the driver's seat in the Nissan Micra is an extremely simple and fast operation. First of all, move the
Nissan Micra k12 fuse diagram
Nissan Micra (2002-2010 / K12) In this video we can see where the Nissan Micra fuse box is located. In the Nissan Micra. We can find the fuse box, just below the steering wheel on

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos