Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Spark plugs

Nissan Micra - Spark plugs

Nissan Micra (2002-2010 / K12)
How to replace the spark plugs of the Nissan Micra 1.0.
Below we will see the steps that will allow us to disassemble and replace the spark plugs of the Nissan Micra 1.0 engine, following the instructions below. …read all…
Posted on 14 October 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to remove spark plugs from Nissan Micra
Let's see how to disassemble the spark plugs of the Nissan Micra. We unscrew the torx that is above each spark plug cap. Remove the spacer and unscrew the …read all…
Posted on 24 November 2022 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Replacing the spark plugs of the Nissan Micra
Today we will see, in this video tutorial, how to disassemble and replace the spark plugs of the Nissan Micra engine, following the instructions below. First …read all…
Posted on 21 December 2022 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos