Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs on a Nissan Micra 1.4

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Spark plugs

See other generations:
Video tutorial

Today's main instructions will guide you through the process of removing and replacing the spark plugs in the Nissan Micra 1.4 engine. First, open the bonnet and begin removing the spark plug connectors; then use a socket wrench with an extension to avoid them and remove them, as shown in the video.

Now install the new spark plugs of the correct type and with the same thread pitch; screw them in by hand and then tighten them with a spanner, ensuring all spark plug connectors are correctly connected. Finally, check that the engine starts properly.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plugs on the Nissan Micra
Replacing the Spark Plugs on the Nissan Micra
Nissan Micra (2002-2010 / K12) Today, we will see how to remove and replace the engine spark plugs on the Nissan Micra, following the instructions below. First, open the bonnet and…
How to replace the spark plugs on the Nissan Micra 1.0
How to replace the spark plugs on the Nissan Micra 1.0
Nissan Micra (2002-2010 / K12) Follow these steps to remove and replace the spark plugs on the Nissan Micra 1.0 engine. First, open the bonnet and disconnect the electrical connect…
How to Remove the Spark Plugs from the Nissan Micra
How to Remove the Spark Plugs from the Nissan Micra
Nissan Micra (2002-2010 / K12) Learn how to remove the spark plugs from the Nissan Micra. Unscrew the Torx screw located on top of each spark plug cap. Remove the spacer and unscre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos