|
Do it yourself
| |||
| ||||
How to change the spark plugs of a Nissan Micra K11
Model: Nissan Micra
K11
- Years 1992-2002
Let's see how to change the spark plugs on a Nissan Micra K11: for safety, disconnect the battery, then locate the spark plugs in the center of the engine. You will see four thick cables that come from the spark plug and go into as many wells. Clean the area with a brush to prevent dirt from getting into the spark plug wells. Unscrew the central coil (which is on many K11s) fixed with two or three bolts, then remove the spark plug cables (if there are single coils): insert the extension with the 21 mm socket into the first spark plug well, unscrewing counterclockwise, pull it out, using a magnetic clamp and repeat for the others. Insert the new spark plugs by hand to avoid damaging the threading, then tighten with the key but without using too much force; excessive tightening is very dangerous. Put the coil (or coils) back in place and reconnect the battery. Do a test by restarting the engine, which should start without hesitation. If the engine shakes or does not start, turn everything off and check that you have properly reconnected all the coil cables. It's the most common mistake.
Posted on 11 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Nissan Micra
(1992-2002 /
K11)
In today's tutorial, you will learn how to remove and replace the fuel filter on a first series Nissan Micra K11 in simple and quick steps. First, op…
Nissan Micra
(1992-2002 /
K11)
Knowing how to change the headlight bulbs in a Nissan Micra K11 can save you both time and the cost of labour at a garage. The bulbs are inexpensive …
Nissan Micra
(1992-2002 /
K11)
In this video tutorial, you will learn how to remove and replace the bulbs in the instrument cluster of a Nissan Micra K11. First, get inside the veh…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.296
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
