Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on the Nissan Micra 1.0

Model: Nissan Micra K12 - Years 2002-2010
Part: Spark plugs

Follow these steps to remove and replace the spark plugs on the Nissan Micra 1.0 engine. First, open the bonnet and disconnect the electrical connector from the mass air sensor; then remove the plastic cover at the top as shown in the video. Next, disconnect the spark plug leads using a socket wrench with an extension to unscrew and remove them. Now install the new spark plugs with the same thread pitch, following the video tutorial until the end!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Spark Plugs on the Nissan Micra
Replacing the Spark Plugs on the Nissan Micra
Nissan Micra (2002-2010 / K12) Today, we will see how to remove and replace the engine spark plugs on the Nissan Micra, following the instructions below. First, open the bonnet and…
How to replace the spark plugs in the Nissan Micra?
How to replace the spark plugs in the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this tutorial, we can see how to replace the spark plugs in the Nissan Micra, a very simple and quick operation. First of all, make sure that the …
How do you replace the spark plugs in the Nissan Micra K13?
How do you replace the spark plugs in the Nissan Micra K13?
Nissan Micra (2010-2017 / K13) The candles of a car, in general and not just the specific vehicle, must be replaced in the long run as they inevitably oxidize or even burn out, so …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos