Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Injectors

Nissan Micra - Injectors

Nissan Micra (1992-2002 / K11)
How do you replace the injectors on the Nissan Micra?
Replacing the injectors on the Nissan Micra is done by opening the bonnet, so that you can access the components located inside the engine compartment: here …read all…
Posted on 21 April 2023 by ScegliAuto
Nissan Micra (1992-2002 / K11)
How do i replace the injectors of the Nissan Micra?
In order to replace the injectors of the Nissan Micra you have to open the hood and go to loosen the bolts that secure the air filter box, disconnect it from …read all…
Posted on 12 March 2024 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos