Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : Gear oil

Nissan Micra - Gear oil

Nissan Micra (2017-2024 / K14)
How to replace the automatic transmission oil in the Nissan Micra?

In this tutorial, we can see how to replace the automatic transmission oil in the Nissan Micra, a very simple operation. First of all, make sure that the …read all…
Posted on 15 August 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
When and how to change the transmission oil of the Nissan Micra

Let's see in this short guide the instructions that will allow us to replace the Nissan Micra transmission oil; in general, the gear oil must be replaced every …read all…
Posted on 20 October 2022 by ScegliAuto

Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos