Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Bodywork

Nissan Micra - Bodywork

Nissan Micra (2017-2024 / K14)
Installation of original ski racks on Nissan Micra
In this video we see how to mount original ski racks on a Nissan Micra K14 version. This is an original accessory, which you can purchase from your Nissan …read all…
Posted on 12 March 2024 by ScegliAuto
Nissan Micra (2010-2017 / K13)
How to remove the front fender of the Nissan Micra K13
In this video, we see how to remove the front fender of the Nissan Micra K13 version: there are six plastic clips to remove as we can see from the footage. …read all…
Posted on 3 October 2023 by ScegliAuto
Nissan Micra (2017-2024 / K14)
Where is the legal chassis number (VIN) located on the Nissan Micra K14 version?
It is important to know where the chassis number of our car is located. It is also important to know that the plate on the windshield, which actually displays …read all…
Posted on 11 September 2023 by ScegliAuto
Nissan Micra (2010-2017 / K13)
How to open the hood on Nissan Micra
Today we will show you a very simple step but which, apparently, not everyone knows: opening the hood on Nissan Micra (here it is the k13 model, sold from 2010 …read all…
Posted on 17 February 2024 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos