Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to remove the front fender of the Nissan Micra K13

Nissan Micra - Video tutorial

Model: Nissan Micra K13 - Years 2010-2017
Part: Bodywork
Operation: How to remove the front fender of the Nissan Micra K13

In this video, we see how to remove the front fender of the Nissan Micra K13 version: there are six plastic clips to remove as we can see from the footage. Once these are removed, we will be able to remove the inner lining of the bumper. Now we can pull the plastic cover towards us and see where the bolts are that hold the bumper from the inside (there is one right under the door on the right) and then the ones we see from above, with the hood open. We will now need to remove the gasket that surrounds the grille at the bottom of the windshield, where we will find another bolt, which will allow us to remove the entire side. Our YouTuber provides a practical summary of all the clips and bolts to remove, to make sure we don't forget anything.


Posted on 3 October 2023 by ScegliAuto



How to replace the front headlight bulb of the Nissan Micra K13.
Nissan Micra (2010-2017 / K13) In this new mini guide dedicated to your Nissan Micra K13 (year 2010-2017), we will discover the steps you need to take in order to correctly replace
How to replace the front headlight bulb of the Nissan Micra K13.
Nissan Micra (2010-2017 / K13) In this new guide dedicated to all Nissan Micra K13 owners (2010-2017), we will discover how to quickly and safely replace the front headlight bulb.
How to replace the rear wiper on Nissan Micra K13
Nissan Micra (2010-2017 / K13) Let's see in this short video how to change the rear wiper on a Nissan Micra K13, third series, in simple and quick steps. First we go to raise our r

Other guides that may interest you

    Frequently Asked Questions

    • Micra 2010-2017 - How to unlock the bonnet on Nissan Micra? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos