Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Nissan Micra

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Body

See other generations:
Video tutorial

Here are the instructions to open the bonnet of the Nissan Micra in simple and quick steps. First, open the driver's side front door and start unlocking the bonnet by pulling the small lever found at the bottom; then move to the centre of the bonnet and push the lever to the left to release it from the lock and open the bonnet, as shown in the video.

At this point, insert the prop rod to secure the bonnet, then close it by bringing it down!


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of the Nissan Micra
How to Open the Bonnet of the Nissan Micra
Nissan Micra (1992-2002 / K11) .. Today's guide will show you how to open the bonnet of the Nissan Micra, following the instructions below. First, get into the vehicle.. …
How to Open the Bonnet on a Nissan Micra
How to Open the Bonnet on a Nissan Micra
Nissan Micra (2010-2017 / K13) Today, I will show you a very simple step that, apparently, not everyone knows: how to open the bonnet on a Nissan Micra (this refers to the K13 mode…
How to Open the Boot of the Nissan Micra from the Inside
How to Open the Boot of the Nissan Micra from the Inside
Nissan Micra (2002-2010 / K12) This guide provides instructions to open the boot of the Nissan Micra in case of an emergency or if the button or lock is broken. First, open the rea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos