Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Nissan Micra

Model: Nissan Micra K11 - Years 1992-2002
Part: Body

Today's guide will show you how to open the bonnet of the Nissan Micra, following the instructions below. First, get into the vehicle and pull the lever located at the bottom, driver's side; then move to the front of the bonnet and release the locking pin found between the grille of the front bumper and the bonnet itself, as illustrated in the video. At this point, lift the bonnet to access the engine compartment, securing the stay; all that remains is to lower the bonnet to close it properly until it clicks.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of the Nissan Micra
How to Open the Bonnet of the Nissan Micra
Nissan Micra (2010-2017 / K13) Here are the instructions to open the bonnet of the Nissan Micra in simple and quick steps. First, open the driver's side front door and start unlock…
How to Open the Bonnet on a Nissan Micra
How to Open the Bonnet on a Nissan Micra
Nissan Micra (2010-2017 / K13) Today, I will show you a very simple step that, apparently, not everyone knows: how to open the bonnet on a Nissan Micra (this refers to the K13 mode…
How to remove the front headlamp of the Nissan Micra?
How to remove the front headlamp of the Nissan Micra?
Nissan Micra (2002-2010 / K12) To remove the front headlamp of the Nissan Micra, open the bonnet to access the supports that secure the headlamp at the top and bottom: these bolts …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos