Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Brake discs

Nissan Micra - Brake discs

Nissan Micra (2002-2010 / K12)
How to remove the disc brake of the Micra
Remove the front brake disc of a Micra? We disassemble the disk with all its attached parts. Let's see how. We lift the car on a column bridge to the desired …read all…
Posted on 21 December 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to remove the front brake disc of a Nissan Micra
Let's see in this video how to intervene on the disassembly of a front brake disc of a Nissan Micra. We place our car on a column bridge, we lift to a …read all…
Posted on 6 October 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
How to replace Nissan Micra brake discs and pads
Remove the wheel in question by unscrewing the bolts that block it, now go and unscrew the 2 bolts that are behind the disc in this way you can remove the …read all…
Posted on 20 September 2023 by ScegliAuto
Nissan Micra (2002-2010 / K12)
Replacement discs and front pads
Raise the car on the lift and remove the front wheel; then unscrew the fixing pins of the brake calliper and hook it to the shock absorber spring, taking care …read all…
Posted on 8 September 2023 by ScegliAuto
Airbags (4) Alternator (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (31) Anti roll bar (1) Roof Rack Bars (1) Battery (8) Arm (2) Gearbox (1) Spark plugs (3) Bodywork (4) Glove box (1) Key (15) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (5) Checks and maintenance (46) Dashboard (4) Bearing (4) Differential (1) Brake discs (4) Headlight (6) Tail light (4) Air filter (9) Cabin air filter (19) Petrol filter (6) Diesel filter (1) Oil filter (2) Hand brake (1) Injectors (2) Reverse gear switch (2) Light bulb (4) Headlight bulb (11) Rear light bulb (7) Dashboard light (1) Handle (3) Muffler (2) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (1) Door panel (12) Front bumper (4) Brake pads (4) Tires (2) Gear Shift Knob (3) Pump (1) Fuel pump (3) Push button (1) Window lift button (1) Instrument cluster (15) Fuse box (28) Seat (6) Drive shaft (1) Lock (5) Suspensions (1) Outside rearview mirror (4) Interior rearview mirror (1) Drums and shoes (4) Windscreen wipers (9) Thermostat (1) Engine head (1) Central tunnel (1) Valve (1) Interior blower (1) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos