|
Do it yourself
| |||
| ||||
How to Remove the Front Brake Disc of a Nissan Micra
Model: Nissan Micra
K12
- Years:
2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
In this video, learn how to remove the front brake disc of a Nissan Micra. Position the car on a column lift and raise it to a comfortable height. Use a socket or air impact wrench to remove the bolts and take off the wheel. Next, unscrew the bolts of the brake caliper to detach it from the bracket. Use a screwdriver to remove the brake pads. Now, take off the caliper bracket and unscrew the bolts on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Apply grease to the bolts and prepare all parts for reassembly. Fit the brake disc with all associated bolts, tighten the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all bolts are tightened properly. Before fitting the wheel, bleed the brake caliper and tighten the bolt. Finally, fit the wheel with the bolts.
Updated on 27 February 2026 by ScegliAuto
Related tutorials
Nissan Micra
(2002-2010 /
K12)
Remove the front brake disc from a Micra? Disassemble the disc along with all its attached parts. Here’s how. Lift the car on a column lift to the de…
Nissan Micra
(1992-2002 /
K11)
In this video tutorial, you will see how to replace the brake pads and brake disc on a Nissan Micra by following some essential steps: the first thin…
Nissan Micra
(1992-2002 /
K11)
Let’s look at replacing the air filter on a Nissan Micra. To replace the air filter, lift the front bonnet where it is located. Raise the front bonne…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |