Do it yourself
| ||||
|
Nissan Micra - Video tutorial
Model: Nissan Micra
K11
- Years 1992-2002 In this video tutorial we can see how it is possible to replace the brake pads and the brake disc, in a Nissan Micra, following some basic steps: the first thing to do is to lift the car using a jack and place stands. safety under the car; unscrew the wheel bolts and remove the wheel; next step we use a ratchet No. 12 socket wrench to unscrew the brake caliper attachment. Use a No. 17 ratchet socket wrench to unscrew the brake caliper bracket attachment. (use a wire brush to clean the brake caliper holder). Once the disc and brake pads have been removed, we can place the new pieces in place. Install the brake caliper support, using a socket wrench size 17. Use the special tool to press down the brake caliper piston as far as it will go; use a 12 ratchet socket wrench to mount the brake caliper and secure it.
Posted on 29 September 2022 by ScegliAuto
How to change the brake pads on a Micra
Nissan Micra (2002-2010 / K12) Changing the brake pads on a Micra? We disassemble the wheel and see the disassembly. We lift the car with a jack to the desired height, immediately
How to remove the front brake disc of a Nissan Micra
Nissan Micra (2002-2010 / K12) Let's see in this video how to intervene on the disassembly of a front brake disc of a Nissan Micra. We place our car on a column bridge, we lift to
How to replace Nissan Micra brake discs and pads
Nissan Micra (2002-2010 / K12) Remove the wheel in question by unscrewing the bolts that block it, now go and unscrew the 2 bolts that are behind the disc in this way you can remov Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |