Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Brake Disc from a Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake rotors

See other generations:
Video tutorial

Remove the front brake disc from a Micra? Disassemble the disc along with all its attached parts. Here’s how. Lift the car on a column lift to the desired height, then remove the wheel.

Unscrew the locking pin of the brake caliper and remove it from the caliper bracket. Use a socket to remove the caliper bracket from the wheel hub. Once the brake disc is free, unscrew the screws with a spanner and detach the disc from the wheel hub. Replace them with new parts (always fit original and compliant parts).

After fitting the brake disc, test its operation. Top up the brakes with new oil.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Brake Disc of a Nissan Micra
How to Remove the Front Brake Disc of a Nissan Micra
Nissan Micra (2002-2010 / K12) In this video, learn how to remove the front brake disc of a Nissan Micra. Position the car on a column lift and raise it to a comfortable height. Us…
Replacing the Front Brake Discs and Pads of the Nissan Micra
Replacing the Front Brake Discs and Pads of the Nissan Micra
Nissan Micra (2010-2017 / K13) The main instructions in this guide will show you how to disassemble and replace the front brake discs and pads of the Nissan Micra. First, lift the …
How to Replace the Brake Pads and Brake Disc on a Nissan Micra
How to Replace the Brake Pads and Brake Disc on a Nissan Micra
Nissan Micra (1992-2002 / K11) In this video tutorial, you will see how to replace the brake pads and brake disc on a Nissan Micra by following some essential steps: the first thin…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos