Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Discs and Pads on a Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake rotors

See other generations:
Video tutorial

Remove the relevant wheel by unscrewing the bolts that secure it. Next, unscrew the two bolts located behind the disc to remove the brake pads. Then, remove the two bolts securing the entire brake assembly to the disc.

To change the disc, you will need to remove the bolt located between the holes that secured the wheel. Clean the area thoroughly with a wire brush and, if possible, use a rust inhibitor.

Now take the new parts and reassemble them in the same position as the old ones, following the steps described in reverse.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Discs and Pads of the Nissan Micra
Replacing the Front Brake Discs and Pads of the Nissan Micra
Nissan Micra (2010-2017 / K13) The main instructions in this guide will show you how to disassemble and replace the front brake discs and pads of the Nissan Micra. First, lift the …
How to Replace the Front Brake Pads on the Nissan Micra?
How to Replace the Front Brake Pads on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the front brake pads on the Nissan Micra, lift the car with a jack or ramp so that the corresponding wheel is off the ground. Then, unscre…
How to Change the Brake Pads on a Micra
How to Change the Brake Pads on a Micra
Nissan Micra (2002-2010 / K12) Changing the brake pads on a Micra? Remove the wheel and see how to disassemble it. Lift the car with a jack to the desired height, then remove the w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos