Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the timing chain on a Nissan Micra, following the instructions below. First, lift the vehicle and begin removing the front wheel; open the bonnet to remove the cylinder head cover, first removing the spark plugs and unscrewing all the screws found on the sides, as shown in the video.

At this point, remove the timing cover to access the belt; take the necessary references for the replacement, following the video to the end!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing chain of the Nissan Micra
Guide to replacing the timing chain of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide, we will see the main instructions on how to disassemble and replace the timing chain of the Nissan Micra. In order to access the timin…
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Nissan Micra (2002-2010 / K12) Today, review the key information needed to dismantle the timing chain on the Nissan Micra 1.2, following the instructions below. First, open the bon…
How do you replace the timing chain of the Nissan Micra?
How do you replace the timing chain of the Nissan Micra?
Nissan Micra (2010-2017 / K13) You can go and perform the replacement of the timing chain of the Nissan Micra by lifting the car with a jack or a bridge, so that it is then possibl…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos