Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cylinder Head Cover on Nissan Micra 1.2 K12

Model: Nissan Micra K12 - Years 2002-2010
Part: Cylinder head

In this video tutorial, you will find instructions that will allow you to remove the cylinder head cover on the Nissan Micra K12, second series, with a 1.2 petrol engine. First, open the bonnet of your car and start by removing the engine cover; then disconnect all the electrical connectors located above the air filter box, and undo the fixing screws to remove it, as shown in the video. At this point, undo the screws of the left engine mount and those of the cylinder head cover, removing the spark plugs; finally, extract the cover!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Radio from Nissan Micra K12
Removing Radio from Nissan Micra K12
Nissan Micra (2002-2010 / K12) In this tutorial, you will see how to remove the original radio from a Nissan Micra K12, second series, in simple steps. First, get inside the car an…
Where to Find the Fuse Box on a Nissan Micra K12
Where to Find the Fuse Box on a Nissan Micra K12
Nissan Micra (2002-2010 / K12) In this mini guide for all owners of a Nissan Micra K12 (2002-2010), we will discover where the fuse box is located and how to access the fuses. Firs…
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Guide to Replacing the Timing Chain on the Nissan Micra 1.2
Nissan Micra (2002-2010 / K12) Today, review the key information needed to dismantle the timing chain on the Nissan Micra 1.2, following the instructions below. First, open the bon…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos