Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Dismantling the Cylinder Head of the Nissan Navara

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cylinder head

See other generations:
Video tutorial

Today's main steps will show you how to dismantle and replace the engine cylinder head of the Nissan Navara. First, open the bonnet and start removing the valve cover by disconnecting the various pipes and connections.

Raise the vehicle and dismantle the serpentine belt and the crankshaft pulley, then remove the timing cover and chain. At this point, remove all injectors from the cylinder head, then unscrew all its bolts for dismantling; replace the gasket if necessary.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Removing the Injectors from the Nissan Navara D40 2.5D
Removing the Injectors from the Nissan Navara D40 2.5D
Nissan Navara (2005-2015 / D40) Today, we will look at the procedure necessary for removing and replacing the diesel injectors on the Nissan Navara D40 with a 2.5 Diesel engine. Fir…
Guide to Removing the Steering Wheel and Airbag of the Nissan Navara
Guide to Removing the Steering Wheel and Airbag of the Nissan Navara
Nissan Navara (2005-2015 / D40) This guide illustrates the procedure for removing and replacing the steering wheel and airbag of the Nissan Navara. First, get inside the vehicle and…
How to Remove the Rear Light of a Nissan Navara
How to Remove the Rear Light of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos