Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to remove the taillight of a Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Tail light
Operation: How to remove the taillight of a Nissan Navara

Before we can begin, we will have to go to open the tailgate of the load compartment of our Nissan Navara. So let's start by unscrewing and removing the screws that secure the rear light to its housing. After that, we will have to go and extract the headlight from its seat. At this point, we will have to disconnect the relative electrical connector, simply by unhooking the relative fixing clip. By the time we have completed this last step, we will have successfully completed the disassembly of the rear light of our Nissan Navara, and we will be free to fit the new light.


Posted on 28 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos