Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light of the Nissan Navara

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

This guide will provide instructions to remove and replace the rear light of the Nissan Navara. First, open the tailgate and start unscrewing the fastening screws found on the side of the rear light; then disconnect the bulb connector to remove it, as shown in the video.

At this point, remove the bulbs from the holder and replace the entire rear light if necessary; install the new light with the new bulbs, ensuring the electrical connection is made and securing it correctly!


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Nissan Navara
How to Remove the Rear Light of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…
How to replace the battery of the Nissan Navara key
How to replace the battery of the Nissan Navara key
Nissan Navara (2014-2024 / D23) Today we will explain how to replace the battery of a Nissan key. The steps to replace the battery of the Nissan Navara remote control are: - Unscrew…
How to Remove the Steering Wheel from the Nissan Navara?
How to Remove the Steering Wheel from the Nissan Navara?
Nissan Navara (2005-2015 / D40) To remove the steering wheel from the Nissan Navara, first remove the clips located at the back of the steering wheel to free the airbag in the centr…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos