Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlamp bulb, you need to remove the headlamp itself: open the rear hatch and unscrew the two fixing screws of the headlamp located along the closure line, pull the headlamp away from its housing and disconnect the power connector; once the headlamp is removed, place it on a work surface, remove the gasket and unclip the bulb holder by widening the plastic clips; at this point, you can proceed with replacing the bulbs (bayonet fitting) and then reverse the steps for reassembly.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulb on Nissan Micra K12
Replacing the Rear Headlamp Bulb on Nissan Micra K12
Nissan Micra (2002-2010 / K12) .. Replacing the rear headlamp bulb is straightforward but requires removing the headlamp itself: open the.. …
How to Replace the Bulb in the Rear Light of a Nissan Micra
How to Replace the Bulb in the Rear Light of a Nissan Micra
Nissan Micra (2002-2010 / K12) Before starting, open the rear hatch of the boot of your Nissan Micra. Begin by unscrewing and removing the two fixing bolts of the rear light. Next,…
How to replace the front headlight bulb of the Nissan Micra
How to replace the front headlight bulb of the Nissan Micra
Nissan Micra (2010-2017 / K13) If you own a Nissan Micra and are wondering how to safely and correctly replace the front headlight bulb, then all you have to do is read the followi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos