Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on Nissan Micra K12

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear headlamp bulb is straightforward but requires removing the headlamp itself: open the boot and locate the fixing screws along the closure line of the boot; then unscrew the headlamp fixing pins and remove it from its housing, disconnect the power connector, remove the seal, and unclip the tabs securing the bulb holder; proceed to replace the bulb (bayonet fitting), then reattach the bulb holder, reposition the seal, connect the power, and secure the headlamp in its housing by tightening the respective fixing screws.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlight on Nissan Micra
Replacing the Rear Headlight on Nissan Micra
Nissan Micra (2002-2010 / K12) Replacing the rear headlight on a Nissan Micra? Remove the broken headlight and replace it with a new one. Open the boot, unscrew the securing screws…
How to Replace the Bulb in the Rear Light of a Nissan Micra
How to Replace the Bulb in the Rear Light of a Nissan Micra
Nissan Micra (2002-2010 / K12) Before starting, open the rear hatch of the boot of your Nissan Micra. Begin by unscrewing and removing the two fixing bolts of the rear light. Next,…
Replacing the Dipped Beam Bulbs on the Nissan Micra K12
Replacing the Dipped Beam Bulbs on the Nissan Micra K12
Nissan Micra (2002-2010 / K12) In today's tutorial video, you will learn how to remove and replace the front headlamp bulb on the Nissan Micra K12, second generation. First, open t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos