Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Replacing the low beam bulbs on the Nissan Micra K12

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Headlight bulb
Operation: Replacing the low beam bulbs on the Nissan Micra K12

In today's video tutorial we will see how to remove and replace the headlight bulb on the second generation Nissan Micra K12. First of all we open the bonnet and start by removing the rubber cap that we find on the back of the headlight; then we go to disconnect the electrical connector of the light bulb and unhook the metal clip, thus extracting the old lamp, as shown in the video. At this point we replace the bulb with the new one, of the right type (in this case of type H4); we just have to reassemble everything, applying the reverse procedure!


Posted on 27 May 2024 by ScegliAuto



How to replace a nissan micra headlight bulb
Nissan Micra (2002-2010 / K12) We see below the instructions necessary to disassemble and replace the bulb of the front light of the Nissan Micra. First of all, we open the bonnet
Replacement of the control panel lights for the air conditioning in the Nissan Micra K12.
Nissan Micra (2002-2010 / K12) In this video, we see how to proceed to replace the bulbs that illuminate the controls of the air conditioning in a Nissan Micra K12. We remove the c
Replacing the battery on the Nissan Micra K12
Nissan Micra (2002-2010 / K12) In this video we will see the step by step instructions to remove and replace the battery on Nissan Micra K12, second series, in simple and quick ste

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos