Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Remove brake light on Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Rear light bulb
Operation: Remove brake light on Nissan Micra

Are the rear light bulbs burned out? Let's see the disassembly of the rear light on Micra. We open the hood of the luggage compartment and lift it. Using a screwdriver, unscrew the tightening screws placed on the side of the headlight. We detach the rear light from its housing once all the screws have been removed (remove the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). We connect the power supply terminals and mount the lighthouse with attached screws. We test the correct operation of the previously mounted bulbs. We turn on the lights of the Nissan Micra.


Posted on 12 December 2023 by ScegliAuto



How to register the parking brake of a Nissan Micra
Nissan Micra (1992-2002 / K11) Does your car's parking brake come loose when you pull it? Let's see how to adjust the handbrake of a Nissan Micra. To start: we pull the handbrake b
How to reset the airbag light on a Nissan Micra
Nissan Micra (1992-2002 / K11) Before we begin, we will have to go and sit in the driver's seat of our Nissan Micra. So let's start by going to activate the instrument panel, and t
How to replace the brake pads and brake disc in a Nissan Micra.
Nissan Micra (1992-2002 / K11) In this video tutorial we can see how it is possible to replace the brake pads and the brake disc, in a Nissan Micra, following some basic steps: the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos