Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Removal of the headlight on Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Headlight
Operation: Removal of the headlight on Nissan Micra

Lift the hood and remove the round clips that secure the structure of the headlight concerned to the bumper: to remove them, simply pry them up from underneath with a flat screwdriver. Remove the front wheel on the side of the affected light by unscrewing the bolts and lifting the car. Now, use a lever to remove the fasteners that secure the wheel arch and unscrew the fixing bolt. Once the wheel arch has been removed, you can access the rear of the headlight and unscrew the bolts. Now, also unscrew the side bolt of the bumper so that you can move it just enough to extract the headlight.


Posted on 18 February 2024 by ScegliAuto



Removal of Nissan Micra headlight
Nissan Micra (2002-2010 / K12) In the video in question we will see the instructions that will allow us to disassemble the front light of a second series Nissan Micra. First we ope
Remove the rear light of the Nissan Micra
Nissan Micra (2010-2017 / K13) Is the rear light damaged? We see the removal of the rear light on a Nissan Micra. We open the hood of the luggage compartment and lift it. Using a s
How do you remove the headlight from the Nissan Micra?
Nissan Micra (1992-2002 / K11) Removing the headlight from the Nissan Micra is done first of all by opening the bonnet: in this way you will have access to the screws that fix the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos