Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How do you remove the headlight from the Nissan Micra?

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Headlight
Operation: How do you remove the headlight from the Nissan Micra?

Removing the headlight from the Nissan Micra is done first of all by opening the bonnet: in this way you will have access to the screws that fix the optical unit from the top. These screws must be unscrewed together with those found in the lower part of the headlight: the latter can be reached by detaching the front bumper moulding. When these screws have also been loosened, it will be possible to remove the headlight from its seat, also disconnecting the corresponding connector in the rear part: in this way it will be possible to connect the new one, fixing it suitably with the relative screws.


Posted on 29 December 2022 by ScegliAuto



How to remove the headlight in the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this tutorial we can see how to remove the headlight in the Nissan Micra, a very simple and fast operation. To access the fixing screws of the sam
How to disassemble the headlight of the Nissan Micra
Nissan Micra (1992-2002 / K11) We will see below the steps that will allow us to disassemble and replace the front headlight of the Nissan Micra, following the instructions below.
How do you remove the headlight from the Nissan Micra?
Nissan Micra (2002-2010 / K12) In order to remove the headlight from the Nissan Micra, you need to go and open the bonnet, in order to access the supports that fix the headlight in

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos