Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to reset the service light of the Nissan Navara 2014

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Instrument cluster
Operation: How to reset the service light of the Nissan Navara 2014

In the following mini guide dedicated to your Nissan Navara (year 2005-2015) we will find out together what are the steps to take in order to manually reset the car maintenance light. First, go inside the cockpit and close all the doors. Then insert the key and turn on the ignition. At this point, locate the button located below the speedometer and keep it pressed. As soon as the mini display starts flashing, release the button and wait a few seconds. When the message "Oil good" appears, it means that the reset was successful and you can turn off the ignition.


Posted on 30 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - How to reset the Adblue warning light on Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the Nissan Navara instrument cluster? Read Answer
    • Navara 2005-2015 - What problems have been found on the Nissan Navara instrument cluster? Read Answer
    • Navara 2014-2023 - How to reset the service light on the Nissan Navara? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos